CS86-BOX-5500U

Version 1.0

Product Overview

The CS86-BOX-5500U is a rugged, high-quality mountable multifunctional industrial PC without a display. Thanks to the integrated brackets and its light-weight construction, it can be firmly attached to any flat surface, such as industrial cabinets or walls.

CS86-BOX-5500U is powered by the high-performance Intel® Core™ i7 5500U CPU. The CS86-BOX-5500U Industrial Box PC also features a broad range of connectivity options, allowing it to meet even the most demanding requirements in harsh industrial or outdoor environments.

Despite the performances, the offered CPU consumes very little power. From the ground-up, the CPU is built for low power consumption.

A specially designed aluminum alloy housing with fins for increased heat dissipation serves as a passive cooler, eliminating the need for built-in fans. The fan-less design reduces noise, as well as the maintenance costs and efforts, increasing reliability at the same time.

Caution

Be careful when handling the product while it is operating: it might become hot under heavy CPU load.

Ordering Options

Most of the Chipsee products can be customized during the ordering process. The product will be shipped with the pre-installed factory defaults if no extra requirements are specified. The table in the Hardware Features section provides information about the default options bundled with the product.

Note

You can order CS86-BOX-5500U from the official Chipsee Store or from your nearest distributor.

Operating System

By default, CS86-BOX-5500U comes with the Ubuntu Linux operating system (OS) pre-installed. A different OS can be selected during the ordering process. For operating systems, CS86-BOX-5500U supports Ubuntu 22 and above, CentOS 9 Linux, Windows 8/10 64bit.

Optional Features

The CS86-BOX-5500U Industrial Box PC offers the highest levels of scalability in the entire product portfolio.

Feel free to contact Chipsee Technical Support at support@chipsee.com for all your customization needs.

CS86-BOX-5500U does not include WiFi/BT module by default. This module is optional and can be selected at the Chipsee store during the ordering process.

Warning

Installation, repair, and maintenance tasks should be performed by trained personnel only.
Chipsee does not bear any responsibility for damage caused by inadequate handling of the product.

Hardware Features

The CS86-BOX-5500U Industrial Box PC offers a broad range of performance and connectivity options for scalable integration, providing expandability according to future needs. Some of the key features are listed in the table below.

Table 316 Table 1: Key Features

CS86-BOX-5500U

CPU

Intel Core i7 5500U, Dual(2) Core 4 Threads, 2.4GHz Base Frequency, 3.0GHz Turbo Frequency

Mother Board

H81U Series, AMI BIOS

GPU

Intel® HD Graphics 5500 iGPU

RAM

4GB(1 x 4GB) DDR3L 1600MHz (default), Up to 16GB (dual channel, optional)

Storage

Default mSATA 128GB SSD (supports up to 2TB), supports 2.5” SATA HDD (SATA2.0)

USB

4 x USB3.0, 2 x USB2.0 HOST ports (Type A)

PCIe

1 x Full Size Mini PCIe

Audio

1 x Audio interface, Realtek ALC662 chip, supports dual channel, stereo, Lineout

LAN

2 x RJ45, GbE (Intel® i225), Wake on LAN (WoL) support

UART

Default 6 x RS232 (COM1 ~ COM4 can be configured to RS485 by using one internal RS232 to RS485 board)

3G/4G

N/A

WiFi/BT

Optional

HDMI

1 x HDMI Out port, up to 2560x1600 60Hz, independent/identical display with VGA

VGA

1 x VGA Out port, up to 1920x1080 60Hz, independent/identical display with HDMI

SATA

1 x Full size mSATA, 1 x SATA

Power IN

12V 5A DC

Current

2.75A (100% CPU, 12V)

OS

Ubuntu 22 and above, CentOS 9 Linux, Windows 8/10 64bit

Operating Temp.

From -15°C to +80°C

Dimensions

235 * 137 * 51mm

Shell Material

Aluminum Alloy

Mounting

VESA, Desktop

Weight

1500g

Power Input

The CS86-BOX-5500U Industrial Box PC should be powered by 12V DC, the connector is 5.5 x 2.5mm DC input.

power_img

12V DC Power Input

The POWER button is located to the opposite side of the power input connector and can be used to switch the power ON or OFF.

power_button

Power Button

Connectivity

There are many connectivity options available on the CS86-BOX-5500U industrial PC. It has 6 x USB Type A connectors configured as HOSTS, 1 x HDMI port, 1 x VGA, 2 x RJ45 connectors supporting Gigabit Ethernet (GbE), and 6 x RS232 connectors that can be configured in RS485 mode (2 x RS232 + 4 x RS485) as per request.

RS232/485 Connectors

Product has 6 x 9-pin D-Sub connectors which are configured as RS232 interfaces by default. The 4 ports: COM1~COM4, can be configured as either RS232 or RS485 communication interfaces through an internal convert board. If different configuration is required, please get in touch with Chipsee technical support at support@chipsee.com

com_img

COM Ports

USB HOST Connectors

CS86-BOX-5500U is equipped with 4 x USB 3.0 HOST and 2 x USB 2.0 HOST ports.

usb_img_1

USB 3.0

usb_img_2

USB 3.0(Left 2) and USB 2.0(Right 2)

LAN Connectors

2 x LAN (RJ45) connectors provide Ethernet connectivity over standardized Ethernet cables. The integrated two-port Ethernet interface supports 10/100/1000BASE-T/TX specifications with automatic speed negotiation and Wake on LAN (WoL) functionality. Power over Ethernet (PoE) is not supported.

lan_img

2 x RJ45 GbE LAN Connectors

Note

Use CAT5 or better cables to achieve full data throughput over maximum distance defined by the 1000BASE-T standard (100m).

HDMI Connector

Although not equipped with the screen on its own, the The CS86-BOX-5500U Industrial Box PC features 1 x HDMI port and 1 x VGA port.

The HDMI out port, supports video output up to 2560x1600 60Hz; the VGA out port, supports up to 1920x1080 60Hz. These two video output ports support independent/identical display, which means you can display same video or different video on two external screens.

hdmi_vga_img

HDMI(Left) and VGA(Right) Ports

Audio In/Out Connector

The CS86-BOX-5500U has one 3.5mm audio port, the Realtek ALC662 chip, supports dual channel, stereo and lineout.

audio_img

Audio Port

Mounting Procedure

The CS86-BOX-5500U Industrial Box PC supports VESA mounting pattern with M3 screws, enabling simplified installation onto any standard VESA mounting rack.

A VESA mount adapter is sold separately, if you need it you can contact us when placing an order.

vesa_img

VESA Adapter (sold separately)

The CS86-BOX-5500U Industrial Box PC also supports desktop mount.

You can find detailed information about mounting in the Mount IPC Guide.

Mechanical Specifications

The outer mechanical dimensions of The CS86-BOX-5500U Industrial Box PC are 235 * 137 * 51mm (W x L x H). Please refer to the technical drawing in the figure below for details related to the specific product measurements.

td_img

CS86-BOX-5500U Technical Drawing

Disclaimer

This document is provided strictly for informational purposes. Its contents are subject to change without notice. Chipsee assumes no responsibility for any errors that may occur in this document. Furthermore, Chipsee reserves the right to alter the hardware, software, and/or specifications set forth herein at any time without prior notice and undertakes no obligation to update the information contained in this document.

While every effort has been made to ensure the accuracy of the information contained herein, this document is not guaranteed to be error-free. Further, it does not offer any warranties or conditions, whether expressed orally or implied in law, including implied warranties and conditions of merchantability or fitness for a particular purpose. We specifically disclaim any liability with respect to this document, and no contractual obligations are formed either directly or indirectly by this document.

Despite our best efforts to maintain the accuracy of the information in this document, we assume no responsibility for errors or omissions, nor for damages resulting from the use of the information herein. Please note that Chipsee products are not authorized for use as critical components in life support devices or systems.

Technical Support

If you encounter any difficulties or have questions related to this document, we encourage you to refer to our other documentation for potential solutions. If you cannot find the solution you’re looking for, feel free to contact us. Please email Chipsee Technical Support at support@chipsee.com, providing all relevant information. We value your queries and suggestions and are committed to providing you with the assistance you require.